Preparing for Automation
258 FTB-2/FTB-2 Pro and FTB-4 Pro
Configuring DCOM Access to Your Unit
10. In the Launch and Activation Permission dialog box, select a user.
11. To allow this user to start and activate the unit remotely, select Allow
for all four permission choices.
12. Repeat steps 10 and 11 for each newly added user.
13. Tap OK.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
