Using Your Unit and Modules in an Automated Test Environment
290 FTB-2/FTB-2 Pro and FTB-4 Pro
Monitoring Remote Commands
With the History parameter, you determine how many commands
you want to keep in the list. You can increase or decrease the
number by using the arrow buttons on each side of the list.
To clear the history, tap Clear.
To view the list in any word processor, tap Copy to copy it to the
clipboard, and then paste it in your document. You can use any
program, as the list is copied in text format.
To save the list as a file, tap Save.
To exit the monitoring utility, tap Exit.
For more information, refer to the user documentation about
communication through TCP/IP over Telnet.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
