Troubleshooting
FTB-2/FTB-2 Pro and FTB-4 Pro 327
Solving Common Problems
Even though my unit is
equipped with the RF
(Wi-Fi) option, no GPS
coordinates are available
in the GPS Coordinates
Viewer utility.
The SMARTGPS option is not
activated on the unit.
Activate the option
(see Activating Software
Options on page 74).
The EXFO Link application
is not running on the smart
device.
Start the EXFO Link application
on the smart device. If EXFO
Link is not installed on the
smart device, see Getting
Ready to Retrieve Geolocation
Information on page 137.
No mobile wireless hotspot
has been created on the
smart device yet.
Create a mobile hotspot to
which the unit can connect.
For more information, refer to
the user documentation that
came with your smart device.
The unit is not connected to
the mobile hotspot of the
smart device.
Ensure that the hotspot has
been configured properly, and
then connect your unit to the
mobile hotspot as you would
do with any wireless network
(see Connecting to a Wireless
Network on page 178.
Problem Possible Cause Solution
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
