Troubleshooting
FTB-2/FTB-2 Pro and FTB-4 Pro 333
Restoring Your Unit to Normal Operation
The recovery operations that are offered for your unit depend on the
operating system that it is running.
IMPORTANT
The creation of a WIM file implies a compression of the files that are
currently installed on your unit. The size of the files after
compression cannot be estimated beforehand.
For this reason, the application WILL NOT PROMPT YOU AT THE
BEGINNING of the operation if the storage capacity (or the file
system) of your USB key is not appropriate.
CAUTION
Before starting one of the recovery operations, connect your
unit to a power outlet using the provided AC adapter/charger or
power cord.
DO NOT TURN OFF your unit while the recovery operation is
underway. Doing so may severely damage your unit. Damaged
units will need to be sent back to EXFO for repair.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
