Getting Started with Your Unit
48 FTB-2/FTB-2 Pro and FTB-4 Pro
Inserting and Removing Test Modules
4. Insert the protruding edges of the module into the grooves of the
receptacle’s module slot.
5. Push the module all the way to the back of the slot, until it stops.
6. If you are working with an FTBx module, turn the two retaining screws
clockwise until they are tightened.
This will secure the module into its “seated” position.
Turn retaining screw
clockwise
Right panel
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
