Getting Started with Your Unit
FTB-2/FTB-2 Pro and FTB-4 Pro 55
Inserting and Removing Test Modules
4d. Lift the mobile part of the retaining screw and use it to turn the
retaining screw counterclockwise until it stops.
The module will be slowly released from the slot.
4e. Place the unit so that the right panel is facing you.
5. Hold the module by its sides or by the handles (NOT by the connectors)
and pull it out.
Note: On the FTBx modules, the retaining screws can be used as handles to pull
out the module safely.
Turn retaining screw
counterclockwise
Left panel
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
