Getting Started with Your Unit
58 FTB-2/FTB-2 Pro and FTB-4 Pro
Turning Off Your Unit
By default, your unit will shut down when you press the power button.
However, you can configure your unit to perform a different action when
the power button is pressed.
You can also configure your unit to automatically restart when AC power
comes back after the unit has turned off (power outage, emergency
shutdown, sleep, or hibernation modes) when battery level is too low.
To exit the sleep mode (or hibernation mode) and resume your
work:
Press the On/Off button.
To turn off the unit completely from the unit itself:
Press the On/Off button.
To turn off the unit completely from Windows 10:
1. From the lower left corner of the screen, tap the Start button ( ).
2. From the Start menu, tap .
3. Tap Shut down.
To turn off the unit completely from Windows 8.1 Pro or Windows
Embedded 8 Standard:
1. From the right side of the screen, swipe left to display the Charm bar.
For more information, see the section about working with Windows
8.1 Pro or Windows Embedded 8 Standard.
2. Tap Settings > Power > Shut down.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
