Test Setup - Test Configurator, Timer, and System
NetBlazer 177
MAC/IP/UDP
Type, VLAN Ethernet Type, choices are 8100 (default for C-VLAN),
88A8 (default for S-VLAN), 9100 (default for E-VLAN), 9200, and 9300.
Drop Eligible:, when set to Yes (DEI = 1), the transmitted frames will
be dropped first on receipt when congestion occurs under test. Drop
Eligible is not available when VLAN type is 8100. This parameter is set
to No by default.
MPLS
Note: MPLS is only available when the MPLS Label is enabled; refer to Modify
Frame Structure on page 173.
Label allows the selection of the MPLS TX labels: 0 to 1048575 (default
is 16). Refer to for the list of MPLS labels.
COS allows the selection of the Class Of Service.
0 (000 - Low) (default)
1 (001 - Low)
2 (010 - Low)
3 (011 - Low)
4 (100 - High)
5 (101 - High)
6 (110 - High)
7 (111 - High)
TTL allows the selection of the Time to Live value: 0 to 255 (default
is 128).
S-OAM
Note: S-OAM is only available with EtherSAM when the S-OAM check box is
selected; refer to Modify Frame Structure on page 173.
MEG/MD Level allows the selection of the Maintenance Entity Group
Level / Maintenance Domain Level: 0 to 7 (default).
To Next Page
Loading...
