EXFO FTB-860 - Page 305

Test Results
NetBlazer 293
Alarms/Errors
The following table lists the availability of alarms/errors per layer for
TX and RX.
Layer Alarms/Errors Page
TX/RX RX only
BER Pattern Loss No Traffic 296
Bit Error, Pattern Error Mismatch ‘0’, Mismatch ‘1’,
Frame Loss, Out-of-Seq.
CLOCK - LOC, LOPPS-L, LOPPS-R 298
CPRI LOF, R-LOS, R-LOF, RAI, SDI Link Down 299
FAS
DS1 AIS. OOF, RAI -300
CRC-6, Framing Bit -
DS3 AIS, Idle, OOF, RDI -301
CP-BIT, FEBE, F-Bit, P-Bit -
E1 AIS, LOF, RAI, LOMF, RAI MF, TS16 AIS -302
FAS CRC-4, E-Bit
E2
E3
E4
AIS, LOF, RAI -303
304
305
FAS -
Ethernet Link Down, Remote Fault, Local Fault
a
Hi-BER, Local Fault Det.,
Local Fault Rcd.
306
FCS Jabber, Oversize, Runt, Undersize
FEC CORR-BIT, CORR-CW, CORR-SYM, STRESS,
UNCORR-CW
CORR, UNCORR 320
Fibre
Channel
- Link Down, Local Fault Detected,
Local Fault Received, Remote Fault
309
- Symbol, Block, FCS, Oversize,
Undersize
Interface LOS, CV, K30.7 Frequency, LOC 311
IP/UDP/TCP - IP Chksum, UDP Chksum,
TCP Chksum
313
ISDN - D-CH Down, D-Ch FCS 313
MPLS-TP
OAM
RDI, AIS, LCK, C-LOS, C-FDI, C-RDI, C-DCI
a
Loss Continuity, Mismerge,
Unexp MEG Lvl, Unexp MEP,
Unexp Period
326