Operation
Selecting a T railer
g229507
Figure 37
1. Full-width ramp in
stowed position
3. H=height of the trailer or
truck bed to the ground
2. Ramp is at least 4 times
as long as the height of
the trailer or truck bed to
the ground
4. T railer
Loading the Machine
1. If using a trailer , connect it to the to wing v ehicle
and connect the safety c hains .
2. If applicable , connect the trailer brak es and lights .
3. Lo w er the ramp ( Figure 37 ).
4. Raise the platfor m.
Important: Al w ays k eep the platf or m up
when loading and unloading the machine.
5. Bac k the mac hine up the ramp .
g031405
Figure 38
1. Back the machine up the
ramp.
2. W alk the machine down
the ramp.
6. Shut off the mac hine and remo v e the k ey .
7. Tie do wn the mac hine near the front caster
wheels , or front frame holes , and the rear
bumper holes with straps , c hains , cable , or ropes
( Figure 39 ). R efer to local regulations for tie-do wn
requirements .
g330790
Figure 39
31
To Next Page
Loading...
Need help?
General
