Extreme Networks Summit1 - Page 118

7-8 S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
S
PANNING
T
REE
P
ROTOCOL
(STP)
D
ISPLAYING
STP S
ETTINGS
To display STP settings for all ports, use the following command:
show stpd {<stpd_name> | all}
This command displays the following information:
• STPD name
• Bridge ID
• STPD configuration information
Sample output from the command is as follows:
show stpd
Stpd:s0 Stp:DISABLED Number of Ports:8
Ports: 1,2,3,4,5,6,7,8
Vlans: Default accounting video sales
BridgeID 80:00:00:e0:2b:00:a4:00
Designated root: 00:00:00:00:00:00:00:00
RootPathCost: 0
MaxAge: 0s HelloTime: 0s ForwardDelay: 0s
CfgBrMaxAge: 20s CfgBrHelloTime: 2s CfgBrForwardDelay:15s
Topology Change Time: 35s Hold time: 1s
Topology Change Detected: FALSE Topology Change:FALSE
Number of Topology Changes: 0
Time Since Last Topology Change: 0s
To display the STP state of a port, use the following command:
show stpd <stpd_name> port <portlist>
This command displays the following:
• STPD port configuration
• STPD state (root bridge, and so on)
• STPD port state (forwarding, blocking, and so on)
Summit.bk : 7STP.FM Page 8 Thursday, June 18, 1998 9:27 AM