12-10 S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
S
TATUS
M
ONITORING
AND
S
TATISTICS
S
WITCH
L
OGGING
The Summit log tracks all configuration and fault information pertaining to the device.
Each entry in the log contains the following information:
• Timestamp — The timestamp records the month and day of the event, along with
the time (hours, minutes, and seconds) in the form HH:MM:SS. If the event was
caused by a user, the user name is also provided.
•Fault level — Table 12-3 describes the three levels of importance that the switch can
assign to a fault.
• Subsystem — The facility refers to the specific functional area of the switch to which
the error refers. Table 12-4 describes the subsystems.
• Message — The message contains the log information with text that is specific to the
problem.
Table 12-3:
Fault Levels Assigned by the Switch
Level Description
Critical A desired switch function is inoperable. The switch may need to
be reset.
Warning A noncritical error that may lead to a function failure.
Informational Actions and events that are consistent with expected behavior.
Table 12-4:
Fault Log Subsystems
Subsystem Description
Syst General system-related information. Examples include memory,
power supply, security violations, fan failure, overheat
condition, and configuration mode.
STP STP information. Examples include an STP state change.
Brdg Bridge-related functionality. Examples include low table space
and queue overflow.
SNMP SNMP information. Examples include community string
violations.
Telnet Information related to Telnet login and configuration performed
by way of a Telnet session.
VLAN VLAN-related configuration information.
Port Port management-related configuration. Examples include port
statistics and errors.
Summit.bk : 12STATUS.FM Page 10 Thursday, June 18, 1998 9:27 AM
To Next Page
Loading...
