Extreme Networks Summit1 - OSPF Reset and Disable Commands

S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
10-19
R
ESETTING AND
D
ISABLING
OSPF S
ETTINGS
R
ESETTING AND
D
ISABLING
OSPF S
ETTINGS
To return OSPF settings to their defaults, use the commands listed in Table 10-6.
Table 10-6:
OSPF Reset and Disable Commands
Command Description
config ospf delete [vlan <name> | all] Disables OSPF on one or all VLANs (router
interfaces).
delete ospf area [<areaid> | all] Deletes and OSPF area. Once an OSPF area is
removed, the associated OSPF area and OSPF
interface information is removed.
disable ospf Disables OSPF.
disable ospf exportstatic Disables exporting of statically configured routes.
Summit.bk : 10PROT.FM Page 19 Thursday, June 18, 1998 9:27 AM