Extreme Networks Summit1 - IP Multicast Routing Reset and Disable Commands

11-8 S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
IP M
ULTICAST
R
OUTING
D
ELETING AND
R
ESETTING
IP M
ULTICAST
S
ETTINGS
To return IP multicast routing settings to their defaults and disable IP multicast routing
functions, use the commands listed in Table 11-4.
Table 11-4:
IP Multicast Routing Reset and Disable Commands
Command Description
disable dvmrp Disables DVMRP on the switch.
disable ipmcforwarding {vlan <name> | all} Disables IP multicast forwarding.
disable igmp {vlan <name> | all} Disables IGMP on a router interface.
disable igmp snooping {vlan <name> | all} Disables IGMP snooping.
unconfig dvmrp [vlan <name> | all] Resets the DVMRP timers to their default
settings.
unconfig igmp Resets all IGMP settings to their default values
and clears the IGMP group table.
clear igmp snooping [vlan <name> | all] Removes one or more IGMP snooping entries.
clear ipmc cache {<group>
{<src_ipaddress> <mask>}} | all]
Resets the IP multicast cache table. If no option
is specified, all IP multicast cache entries are
flushed.
Summit.bk : 11IPMULT.FM Page 8 Thursday, June 18, 1998 9:27 AM