S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
9-15
R
OUTING
C
ONFIGURATION
E
XAMPLE
R
OUTING
C
ONFIGURATION
E
XAMPLE
Figure 9-2 illustrates a switch that has three VLANs defined as follows:
• Finance
— Protocol-sensitive VLAN using the IP protocol
— Ports 1 and 3 have been assigned
— IP address 192.207.35.1
• Personnel
— Protocol-sensitive VLAN using the IP protocol
— Ports 2 and 4 have been assigned
— IP address 192.207.36.1
• MyCompany
— Port-based VLAN
— All ports have been assigned
disable icmp unreachables {vlan <name> | all} Disables the generation of ICMP unreachable
messages on one or more VLANs.
disable icmp useredirects Disables the changing of routing table
information when an ICMP redirect message
is received.
disable irdp {vlan <name> | all} Disables the generation of router advertisement
messages on one or more VLANs.
Table 9-3:
ICMP Configuration Commands (continued)
Command Description
Summit.bk : 9ROUT.FM Page 15 Thursday, June 18, 1998 9:27 AM
To Next Page
Loading...
Need help?
General
