Extreme Networks Summit1 - STP Disable and Reset Commands

S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
7-9
D
ISABLING AND
R
ESETTING
STP
D
ISABLING AND
R
ESETTING
STP
To disable STP or return STP settings to their defaults, use the commands listed in
Table 7-2.
Table 7-2:
STP Disable and Reset Commands
Command Description
delete stpd <stpd_name> Removes an STPD. An STPD can only be removed if
all VLANs have been deleted from it.
disable stpd [<stpd_name> | all] Disables the STP mechanism on a particular STPD,
or for all STPDs.
disable stpd port <portlist> Disables STP on one or more ports. Disabling STP
on one or more ports puts those ports in
FORWARDING state; all BPDUs received on those
ports will be disregarded.
unconfig stpd {<stpd_name> | all} Restores default STP values to a particular STPD or
to all STPDs.
Summit.bk : 7STP.FM Page 9 Thursday, June 18, 1998 9:27 AM