Extreme Networks Summit1 User Manual

3-6 S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
A
CCESSING
T
HE
S
WITCH
C
OMMON
C
OMMANDS
Ta b le 3 - 3 describes common commands used to manage the switch. Commands specific
to a particular feature are described in the other chapters of this guide.
Table 3-3:
Common Commands
Command Description
create account [admin | user] <username>
{<password>}
Creates a user account.
create vlan <name> Creates a VLAN.
config account <username> {<password>} Configures a user account password.
config banner Configures the banner string. You can
enter up to 24 rows of 80-column text that
is displayed before the login prompt of
each session. Press [Return] at the
beginning of a line to terminate the
command and apply the banner. To clear
the banner, press [Return] at the beginning
of the first line.
config devicemode [bridging | iprouting | ipmc |
ipqos]
Configures the operating mode of the
switch. Specify the following:
■
bridging
— Layer 2 bridging
functions only
■
iprouting
— Bridging and IP unicast
routing functions
■
ipmc
— Bridging, IP unicast routing,
and IP multicast routing functions
■
ipqos
— IP flow-based QoS functions
If this command is used to change the
operating mode of the Summit once it is
up and running, it causes the switch to
save the configuration and reboot. The
default operating mode is
ipmc
.
config port <portlist> auto off {speed [10 | 100]}
duplex [half | full]
Manually configures the port speed and
duplex setting of one or more ports.
Summit.bk : 3MGMT.FM Page 6 Thursday, June 18, 1998 9:27 AM

Extreme Networks Summit1 Specifications

General

Brand	Extreme Networks
Model	Summit1
Category	Switch
Language	English