EasyManua.ls Logo

Extreme Networks Summit1 - Using Extremeware Vista; Disabling Web Access

Extreme Networks Summit1
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
3-17
U
SING
E
XTREME
W
ARE
V
ISTA
U
SING
E
XTREME
W
ARE
V
ISTA
ExtremeWare
Vista
is device-management software running in the Summit that
enables you to access the switch over a TCP/IP network, using a standard Web browser.
Any properly configured standard Web browser that supports frames (such as Netscape
Navigator 3.0 or Microsoft Internet Explorer 3.0) can manage the switch over a TCP/IP
network.
For more information on assigning an IP address, refer to “Configuring Switch IP
Parameters,” on page 3-12.
The default home page of the switch can be accessed using the following command:
http://<ipaddress>
When you access the home page of the switch, you are presented with the Logon
screen.
For more information on using ExtremeWare Vista, refer to Chapter 13.
D
ISABLING
W
EB
A
CCESS
By default, Web access is enabled on the Summit. To disable it, enter the following
command:
disable web
To re-enable Web access, enter the following command:
enable web
Reboot the switch in order for these changes to take effect.
For more information on rebooting the switch, refer to Chapter 14.
Summit.bk : 3MGMT.FM Page 17 Thursday, June 18, 1998 9:27 AM

Table of Contents

Related product manuals