S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
2-1
2
Installation and Setup
This chapter describes the following:
• How to decide where to install the Summit
• Gigabit Ethernet configuration rules
• How to install the switch in a rack or free-standing
• How to connect equipment to the console port
• How to check the installation using the Power On Self-Test (POST)
F
OLLOWING
S
AFETY
I
NFORMATION
Before installing or removing any components of the switch, or before carrying out any
maintenance procedures, you must read the safety information provided in Appendix A
of this guide.
D
ETERMINING
THE
S
WITCH
L
OCATION
The Summit is suited for use in the office, where it can be free-standing or mounted in a
standard 19-inch equipment rack. Alternatively, the device can be rack-mounted in a
wiring closet or equipment room. Two mounting brackets are supplied with the switch.
Summit.bk : 2INSTALL.FM Page 1 Thursday, June 18, 1998 9:27 AM
To Next Page
Loading...
