Extreme Networks Summit1 - Page 178

12-2 S
UMMIT
S
WITCH
I
NSTALLATION AND
U
SER
G
UIDE
S
TATUS
M
ONITORING AND
S
TATISTICS
show config Displays the current switch configuration to the
terminal. You can then capture the output and store
it as a file.
show diag Displays switch software diagnostics.
show dvmrp {vlan <name> | route | all} Displays the DVMRP configuration and statistics, or
the unicast route table. The default setting is
all
.
show edp Displays connectivity information for neighboring
Summit switches.
show fdb {all | <macaddress> | vlan
<name> | <portlist> | permanent | qos}
Displays the forwarding database contents including
MAC address, associated VLAN, port, age-of-entry
configuration method, and status. Providing one of the
options acts as a filter on the display. Providing a
VLAN name displays all entries for the VLAN. Use the
MAC address to locate a specific entry in the FDB.
show gvrp Displays the current configuration and status of
GVRP.
show igmp snooping {<vlan <name> |
all}
Displays IGMP snooping registration information, and
a summary of all IGMP timers and states.
show iparp {<ip_address> | vlan
<name> | all | permanent}
Displays the IP Address Resolution Protocol (ARP)
table. You can filter the display by IP address, VLAN,
or permanent entries.
show iparp proxy {<ipaddress> {<mask}
| all}
Displays the proxy ARP table.
show ipconfig {vlan <name> | all} Displays configuration information for one or more
VLANs, including the following:
■
IP address, subnet mask
■
IP forwarding information
■
BOOTP configuration
■
VLAN name, VLANid
■
Global ICMP configuration
■
Global IGMP configuration
■
Global IRDP configuration
show ipfdb {<ipaddress> | vlan <name>
| all}
Displays the contents of the IP forwarding database
table.
Table 12-1:
Switch Monitoring Commands (continued)
Command Description
Summit.bk : 12STATUS.FM Page 2 Thursday, June 18, 1998 9:27 AM