Extron electronics VTG 400 - Page 43

3-7VTG 400/400D • Serial Communication
List rates
All rates L/l
X4
...
X4
List VTG scan rates (all rates
returned).
By range
X24
L/
X24
l
X4
...
X4
List scan rates for range
X24
.
Set test pattern
Specific pattern
X2
J/
X2
j Tst
X2
Select pattern
X2
.
Increment up +J/+j Tst
X2
Select next higher pattern.
Increment down -J/-j Tst
X2
Select next lower pattern.
View J/j
X2
View current setting.
Invert test pattern / Special function (blue mode for SMPTE color bars and pause for CTF)
Invert current test pattern 1*21# Inv1 Invert or activate the special
function for the current test
pattern.
Return to normal test pattern 0*21# Inv0
Disables special function for
selected pattern.
View status 21# 1
/0 = on/off View current setting.
Set output rate
Specific value
X3
*
X24
= Rte
X3
*
X24
Select rate
X3
from range
X24
.
Increment up += Rte
X3
*
X24
Select next higher rate in
current range.
Increment down -= Rte
X3
*
X24
Select next lower rate in
current range.
View =
X3
*
X24
View current setting.
Set screensaver timeout interval
Specific value
X5
*1# Tmo
X5
Set timeout interval.
Increment up +1# Tmo
X5
Select next higher interval.
Increment down -1# Tmo
X5
Select next lower interval.
View 1#
X5
View current setting.
Set test pattern autosequence
Specific value
X6
*2# Asq
X6
Set autosequence interval.
Increment up +2# Asq
X6
Select next higher interval.
Increment down -2# Asq
X6
Select next lower interval.
View 2#
X6
View current setting.
Set audio signal type
Set signal type
X7
*3# Ast
X7
Select audio signal type
X7
.
View 3#
X7
View current setting.
Set audio tone frequency (applies to sine, square wave, and burst signals only)
Specific value
X14
*4# Afq
X14
Set tone frequency to
X14
.
Increment up +4# Afq
X14
Select next higher frequency.
Increment down -4# Afq
X14
Select next lower frequency.
View 4#
X14
View current setting.
Set audio sweep speed (applies to audio sweep signal only)
Set sweep speed
X15
*5# Sws
X15
Set audio sweep speed to
X15
.
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to VTG) (VTG to host)
(Continued)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de