FAAC A1400 AIR - 2. Automation A1400 AIR H100-H140; 2.1 Intended Use; 2.2 Unauthorised Use

A1400 AIR 10 532129 04 - Rev.B
1
230V~
6
1
2
543
7
7
Translation of the original instructions
ENGLISH
2. AUTOMATION A1400 AIR H100H140
2.1 INTENDED USE
The FAAC series A1400 AIR systems are designed to automatically
operate, manage and control linear horizontal motion one- or two-
leaf sliding doors.
The A1400 AIR series automations are designed to automate entry
doors that are used exclusively for pedestrian traffic.
They are compliant with standard EN 16005:2012.
They are suitable for indoor installation, for applications that meet
the specifications indicated in 7.
!
No other use outside the ones set out above is allowed by the manu-
facturer.
FAAC declines all liability deriving from misuse or uses other than that
for which the automation is intended.
LIMITATIONS FOR USE
Do not use the automation in the presence of the following conditions:
- direct exposure to weathering
- exposure to direct water jets of any type or extent
- outside the technical limitations set out. Specifically, it is forbid-
den to connect to sources of energy other than those set out.
2.2 UNAUTHORISED USE
It is forbidden to:
- use the automation for uses other than THE INTENDED USE;
- use the automation for installing smoke and/or fire protection
doors (fire doors);
- use the automation with mobile and fixed guards tampered
with or removed;
- use the automation in environments in which there is a risk of
explosion and/or fire: the presence of flammable gases or fumes is
a serious safety hazard (the product is not 94/9/EC ATEX certified);
- integrate other systems and/or commercial equipment not
intended;
- use other systems and/or commercial equipment for uses not
authorised by the respective manufacturers;
- use commercial devices for purposes other than those set out by
the respective manufacturers.
external
internal
1 Internal monitored opening detector and safety in closing (XV1/XDT1) optional accessory
2 External monitored opening detector and safety in closing (XV1/XDT1) optional accessory
3 SDK EVO optional accessory
4 Key switch to lock the SDK EVO optional accessory
5 Emergency/Key/OPEN control buttons optional accessories
6 Power supply 230V~
7 Internal monitored detec tors for safe opening (XBFA) optional accessory