A1400 AIR 17 532129 04 - Rev.B
Translation of the original instructions
ENGLISH
ACCESSORIES
Motor block XB LOCK and Internal release - OPTIONAL
It acts directly on Motor_1 mechanically locking it to maintain leaf position.
Supplied with internal release device which allows emergency opening to
be performed in case of need.
Ready for installing external release.
Monitoring - OPTIONAL
The magnetic monitoring sensor detects the door status: closed/not closed
It is fitted with connector for connecting a relay (e.g. to connect an alarm
system).
The monitoring micro switch on the motor block detects any malfunction.
It is ready to remotely activate a light or sound warning.
XM LOCKMotor block - OPTIONAL
It acts directly on the Motor, mechanically locking it in order to maintain
the leaves in position.
Emergency battery - OPTIONAL
It allows the automation to operate in case of mains power failure.
SDK EVO - OPTIONAL
Programming and function selector device with display.
LK EVO - OPTIONAL
Programming and function selector device without display.
KS EVO - OPTIONAL
Device with function selector key without display.
TK50 - Sliding shoes with bracket - OPTIONAL
For fastening to wall or fixed leaf (supplied in a PAIR).
TK50 - Swivel sliding shoes - OPTIONAL
For fastening to the floor (supplied in a PAIR).
TK20 - Sliding shoes with bracket - OPTIONAL
For fastening to fixed leaf (supplied in a PAIR).
Spacer for leaf carriage unit H140 - (2 for each leaf) - OPTIONAL
To use with casing H140 per obtain the correct leaf installation position.
Lower guide profile - OPTIONAL
Allows the lower leaf profile to be adapted to the sliding shoe. Supplied
in 3.0 m long bars.
Upper profile for connecting the leaf - (1 for each leaf) - OPTIONAL
Accessory to adapt the upper leaf profile to the carriage connections.
Supplied in 3.0 m long bars.
Sweeper for lower guide profile (H19 or H25) - OPTIONAL
Completes the floor guide system.
Glass leaf lower shoes - OPTIONAL
For glass leaf sliding.
Glass leaf gripper - OPTIONAL
To Next Page
Loading...
