A1400 AIR 42 532129 04 - Rev.B
A1400 AIR 42 532129 04 - Rev.B
54
1
2
3
1
2
3
Translation of the original instructions
ENGLISH
Translation of the
original instructions
ENGLISH
Passage opening
Double leaf with rM = 1
(Default)
11.1 MOUNTING THE BELT
close the leaves at the centre line (closing point in case of single leaf)
Move the leaves by hand and ensure the movement is smooth and
friction-less along the stroke.
!
It is mandatory to use a FAAC belt for the A1400 AIR
1. Place one end of the belt over the pulley of Motor_1. Fasten the
two ends using the fittings 54(1) and screws 54(2).
!
The middle slot of the belt fitting must be left empty 54-
.
2. Position the assembled fitting with the belt on the carriage. Keep
to the positions indicated in 54 and fasten using the screws
54-
.
In case of double leaf, the belt joint must be fastened on the lower fitting
(on the left leaf).
The position of the belt fitting determines the opening direction.
3. Position the belt also on the pulley of the second motor.
Left leaf Right leaf
11. ASSEMBLE THE BELT, CASING AND ACCESSORIES
RISKS
PERSONAL PROTECTIVE EQUIPMENT
REQUIRED TOOLS
8
6
Do not place hands between: the pulley and belt or between the sliding
guide and carriage wheels.
Double leaf with rM = -1
Passage openingLeft leaf Right leaf
To Next Page
Loading...
