A1400 AIR 24 532129 04 - Rev.B
9
10
11
2
2
1
1
3
2
2
6
6
Nm
2
6
6
Nm
2
Translation of the original instructions
ENGLISH
SAFETY CABLES AND SPACERS
1. Insert the largest end of each cable into the support profile 9-
.
2. Insert 2 vibration damper spacers 9-
onto the edge of the
profile. In the case of profiles longer than 3 m, add a spacer in the
middle 9-
.
MOTOR
1. Insert the motor in the side of the support profile.
2. Fasten using the 3 plates with screws 10-
.
RETURN PULLEY
1. Insert the return pulley from the side 11-
.
2. Fasten using the 2 plates with screws 11-
.
To Next Page
Loading...
