FAAC A1400 AIR - 11.7 Fitting the Cover

A1400 AIR 49 532129 04 - Rev.B
64 65
66
63
1
5
4
8
1
7
4
3 2
1
6
6
Translation of the original instructions
ENGLISH
Installation with side profiles and central bracket.
11.7 FITTING THE COVER
!
On the profile there must be:
- the safety cables 63-

- the spacers 65-

- the side profiles 64-

or the cover fastening brackets 63-

1. Place the cover on the profile 63 or 64.
2. Hold the cover in the open position 65-

(lift it, then push
it into the profile).
3. Fasten the safety cables to the cover 66-

and close the cover.
!
The safety cables must be correctly installed to protect from the risk of
accidental casing fall.
Push the cover slightly in order to insert the blocks into the brackets or
side profiles 63-

or 64-

.

The markings on the casing allow it to be adapted to varying leaf thick-
ness. The breaking points 66-

make it possible to remove the
profile section in excess.
Cover fastening bracket installation.