FAAC A1400 AIR - 12.7 Connecting the 2 nd Motor

A1400 AIR 59 532129 04 - Rev.B
82
1
2
1
2
83
1
1
2
84
1
Translation of the original instructions
ENGLISH
12.7 CONNECTING THE 2
ND
MOTOR
To connect, proceed as follows:
1. Use the extension cable supplied with the A1400 AIR DM KIT.
2. Connect the motor cable connector to the terminal block.
3. Insert the keyed connector onto the plug on the 2
nd
motor board
via the hole in the plastic cover as shown in 84-.
4. Activate parameter
dM
dM on the E1400 board 14.
red
black
Connection
2
nd
MOTOR