Fanvil X7C User Manual

135
12.14 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 29 – Time & Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP

Enable time-sync through SNTP protocol

Time Synchronized via DHCP

Enable time-sync through DHCP protocol

Primary Time Server

Set primary time server address

Secondary Time Server

Set secondary time server address, when
primary server is not reachable, the device will
try to connect to secondary time server to get
time synchronization.

Time Zone

Select the time zone

Resync Period

Time of re-synchronization with time server

12-Hour Clock

Set the time display in 12-hour mode

Date Format

Select the time/date display format

Daylight Saving Time Settings
Local

Choose your local, phone will set daylight saving
time automatically based on the local

DST Set Type

Choose
DST Set Type
, if Manual, you need to
set the start time and end time.

Fixed Type

Daylight saving time rules are based on specific
dates or relative rule dates for conversion.
Display in read-only mode in automatic mode.

Offset

The offset minutes when DST started

Month Start

The DST start month

Week Start

The DST start week

Weekday Start

The DST start weekday

Hour Start

The DST start hour

Minute Start

The DST start minute

Month End
The DST end month
Week End
The DST end week
Weekday End
The DST end weekday
Hour End
The DST end hour

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)