Fanvil X7C User Manual

134
RTP Control Protocol(RTCP) Settings
CNAME user
Set CNAME user
CNAME host
Set CNAME host
RTP Settings
RTP keep alive
Hold the call and send the packet after 30s
Alert Info Ring Settings
Value
Set the value to specify the ring type.
Ring Type
Type1-Type9
12.12 Phone settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Table 28 - Multicast parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the
highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence
over all incoming paging calls.
Name
Listened multicast server name
Host:
port
Listened multicast server’s multicast IP address
and port.
12.13 Phone settings >> Action
Action URL
1RWH$FWLRQXUOVDUHXVHGIRU,33%;V\VWHPVWRVXEPLWSKRQHHYHQWV3OHDVHUHIHU
WR)DQYLO$FWLRQ85
/IRUGHWDLOV
KWWSZZZIDQYLOFRP8SORDGV7HPSGRZQORDGEDIHDSGI


Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)