Fanvil X7C User Manual

28
8 Basic Function
8.1 Making Phone Calls
 Default Line
The device provides twenty line services. If both lines are configured, user can make or
receive phone calls on either line. If default line is configured by user, there will be a
default line to be used for making outgoing call which is indicated on the top left corner.
To change the default line, user can press left/right navigator buttons to switch between
two lines. Enable or disable default line, user can press [Menu] >> [Features] >>
[Basic] >> [General] >> [Default Line] or configure from Web Interface (Web / PHONE /
Features / Basic Settings).
Picture 14 - Default line
 Dialing Methods
User can dial a number by,
z Entering the number directly
z Selecting a phone number from phonebook contacts (Refer to 10.2.1 Local
contacts)
z Selecting a phone number from cloud phonebook contacts (Refer to 10.2.3
Cloud Phone Book)
z Selecting a phone number from call logs (Refer to 10.3 Call Log)
z Redialing the last dialed number
 Dialing Number then Opening Audio
To make a phone call, user can firstly dial a number by one of the above methods. When
the dialed number is completed, user can press [Dial] button on the soft-menu, or press

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)