10.1.2 Time & Date
Users can set the phone time through the phone interface and web interface.
z Phone end: When the phone is in the default standby state, press the [Menu] >>
[Basic] >> [UI Preference] >> [Time & Date] , use the up/down navigation button to
edit parameters, press the [OK] to save after completion, as shown in the figure:
Picture 89 - Set time & date on phone
z Web end: Log in to the phone webpage and enter [Phone Settings] >>
[Time/Date] , as shown in the figure:
Picture 90 - Set time & date on webpage
To Next Page
