Fanvil X7C User Manual

61
9.1.2 Use the BLF Function
The BLF, also known as a "busy light field," notifies the user of the status of the
subscribed object and is used by the server to pick up the call. BLF helps you monitor the
other person's status (idle, ringing, talking, off).
BLF function˖
z Monitor the status of subscribed phones.
z Call the subscribed number.
z Transfer calls/calls to the subscribed number.
z Pickup incoming calls from subscribed number.
1˅ Monitors the status of subscribed phones.
Configuration BLF function keys, when the subscription of the number of the state (idle,
ringing, talking) is changed, the function key state of LED lights will have corresponding
change, see appendix Ɋ 6.3 to get to know each other under different status leds.
2˅ Call the subscribed number.
When the phone is in standby mode, press the configured BLF key to call out the
subscribed number.
3˅ Transfer calls/calls to the subscribed number.
Refer to Table 9.1.1-blf function key subtype parameter list, the BLF key can be used for
blind rotation, attention-rotation and semi-attention-rotation of the current call, and also
can invite the subscribed number to join the call and send DTMF, etc.
4˅ Pickup incoming calls from subscribed phones.
When configuring BLF function key, configure the pickup number.
When be subscription number telephone ringing, refer to appendix ȼ 6.3 BLF LED will
flash a red light at this time. At this point, press the BLF button to answer the incoming
call from the subscribed number.
9.2 BLF List
BLF List Key is to put the number to be subscribed into a group on the server side, and
the phone uses the URL of this group to make unified subscription. The specific
information, number, name and status of each number can be resolved based on notify
sent from the server. The unoccupied Memory Key is then set to the BLF List Key. If the
state of the subscription object changes later, the corresponding led light state will be
changed.
Configure BLF List function: log in the phone page, enter the [Line] >> [SIP] >>
[Advanced settings] page, open the BLF List, and configure the BLF List number.

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)