with a SIP header of Alert
-
Info instruction to automatically answer the call
after specific delay.
Enable mute mode during the intercom call
If the incoming call is intercom call, the phone plays the
intercom tone
Enable Intercom Barge by selecting it, the phone auto answers
l during a call. If the current call is intercom
call, the phone will reject the
second intercom call
9.6 MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Picture 75 - Multicast Settings Page
Table 12 - MCAST Parameters on Web
Define the priority of the active call, 1 is the
To Next Page
