Fanvil X7C User Manual

79
10 Phone Settings
10.1 Basic Settings
10.1.1 Language
The user can set the phone language through the phone interface and web interface.
z Phone end˖After resetting the factory settings, the user needs to set the language;
when setting the language during standby, go to [Menu] >> [Basic] >> [UI
Preference] >> [Language] Settings, as shown in the figure.
Picture 87 - Phone language setting
z Web interface: Log in to the phone webpage and set the language in the drop-down
box at the top right corner of the page, as shown in the figure:
Picture 88 - Language setting on Web page
z The function box on the right side of the web interface language setting box is
“Synchronize language to phone”; if selected, the phone language will be
synchronized with the webpage language. If it is not selected, it will not be
synchronized.

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)