Fanvil X7C User Manual

33
Picture 21 - Two way calling
User can press up/down navigator buttons to switch screen page, and switch call focus
by pressing [Resume] button.
 Ending One Call
User may hang up the current talking call by closing the audio channel or press [End]
button. The device will return to single call mode in holding state.
8.3 End of the Call
After the user finishes the call, the user can put the handle back on the phone, press the
hands-free button or Softkey [End] key to close the voice channel and end the call.
Note! When the phone is in the reserved state, the user must press the [Resume]
key to return to the call state, or put the receiver back and press the hands-free
hook to end the call.
8.4 Redial
z Redial the last outgoing number:
When the phone is in standby mode, press the redial button and the phone will call
out the last number dialed.
z Call out any number with the redial key:
Enter the number, press the redial key, and the phone will call out the number on the
dial.
z Press the redial key to enter the call record:
Log in the phone page, enter [Phone Settings] >> [Features] >> [Redial Settings],

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)