Fanvil X7C User Manual

83
10.1.3.2 Screen Saver
z Press [Screen Settings] to find the [Screen protection] button, press [left] / [right]
button to open/close the screen protection, set the timeout time, the default is 15S,
after completion, press [OK] button to save.
z After saving, return to standby mode and enter the screen saver after 15s, as
follows:
Picture 93 - Phone screen saver
10.1.4 Ring
When the device is in the default standby mode,
z Press soft-button [Menu] till you find the [Basic] item.
z Enter [Ring & Tone] item till you find [Ring] item.
z Enter [Ring] item and you will find [Headset] or [Hands-free] item, press left / right
navigator keys to adjust the ring volume, save the adjustment by pressing [OK]
when done.
z Enter [Ring type] item, press left / right navigator keys to change the ring type, save
the adjustment by pressing [OK] when done.
10.1.5 Voice Volume
When the device is in the default standby mode,
z Press soft-button [Menu] till you find the [Basic] item.
z Enter [Ring & Tone] item till you find [Voice Volume] item.
z Enter [Voice Volume] item and you will find [Headset], [Hands-free] and [Headset]
item.
z Enter [Headset] or [Hands-free] or [Headset] item, Press Left / Right navigator keys

Fanvil X7C Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Black
Video call	Yes
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Dialing	Tone/Pulse
Lines quantity	20 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Keypad number of keys	12
Display resolution	- pixels
Display resolution (numeric)	5 pixels
Ringer type	MP3
Number of handles included	1 pc(s)