Fanvil X7C - SCA Shared Call Appearance

69
highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence
over all incoming paging calls.
Name
Listened multicast server name
Host:
port
Listened multicast server’s multicast IP address
and port.

Multicast
˖
z Go to web page of [Function Key] >> [Function Key] , select the type to
multicast, set the multicast address, and select the codec.
z Click Apply.
z Set up the name, host and port of the receiving multicast on the web page of
[Phone Settings] >> [MCAST].
z Press the DSSKY of Multicast Key which you set.
z Receive end will receive multicast call and play multicast automatically.
9.7 SCA
˄
Shared Call Appearance
˅
Users need the support of server end to use SCA function. You can refer to
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba38181e4e4b.pdf
1˅ Configure on Phone
z When registering with the BroadSoft server, a Fanvil Phone can register the account
created previously on multiple terminals.