FENDT 926 Vario User Manual

95
OPERATION
Unlinking 3-point implements using
depth control
Operation_Pic_number:1
● Turn depth control (O) fully to the right.
● Quick Lift switch (P) at 'Control' (P1), LED is
lit.
● With depth control (O), slowly lower the im-
plement till there is no load on the top link,
then unhitch the implement.
● Release the catch hook and lower the hy-
draulics completely.
Setting the desired transport height
Operation_Pic_number:1
● Lower the implement completely.
● With rotary switch (P3), set 30 % lift, bar indi-
cator (A1).
● Wait until indicator bar (A2) displays 0%.
Fig.217
Fig.218
Operation_Pic_number:1
● Quick Lift switch (P) at 'Raise' (P2), LED is lit.
The implement is raised by about 1/4 of its lift
height.
● Using rotary switch (P3), select the desired
transport height.
Road haulage (transport lock).
● For road transport turn depth control (O) fully
to the right.
Fig.219

FENDT 926 Vario Specifications

General

Engine Power	260 hp
Transmission	Vario continuously variable transmission
Fuel Tank Capacity	500 liters
Weight	10, 500 kg
Engine type	6-cylinder turbocharged
Rated engine speed	2100 rpm
Displacement	7.5 liters
Number of cylinders	6
Maximum speed	50 km/h
Tire Options	Multiple options available