Festo CPX-CEC-S1-V3 User Manual

Festo control block CPX-CEC
2.5 Operating modes of the CPX terminal with Codesys controller
The Codesys controller can be operated in different modes, depending on the
requirement:
– Standalone
– Remote Controller Ethernet
– Remote Controller Fieldbus (fieldbus node required)
The individual operating modes are described briefly below:
2.5.1 Standalone operating mode
1
CPX-CEC-...-V3
2
CPX terminal controlled by CPX-CEC-...-V3
Standalone operating mode
2.5.2 Remote Controller Ethernet operating mode
1
CPX-CEC-...-V3 for communication connected to an Ethernet network
2
CPX terminal controlled by CPX-CEC-...-V3
Remote Controller Ethernet operating mode
8

Festo CPX-CEC-S1-V3 Specifications

General

Brand	Festo
Model	CPX-CEC-S1-V3
Category	Controller
Language	English