Festo CPX-CEC-S1-V3 User Manual

Festo control block CPX-CEC
5.2 Status LEDs
The LEDs of the CPX-CEC-...-V3 indicate the operating condition of the device.
1
RUN PLC status: started (green)
1)
2
PS Electronics supply,
sensor supply (green)
STOP PLC status: stopped (yellow)
1)
PL Load supply (green)
ERROR
PLC runtime error (red) SF System fault (red)
TP Ethernet connection: Link/Traffic
(green)
M Modify/force active (yellow)
1) The RUN and STOP LEDs indicate the status of the RUN/STOP rotary switch
Figure: Status LEDs on the CPX-CEC-...-V3
LED Sequence
Meaning Error handling
RUN (PLC
status
started)
Lights up
green
PLC program
started
(RUN/STOP
switch set to
position "1 ... F")
–
Does not
light up
PLC program
stopped
(RUN/STOP
switch set to
position "0")
• Set RUN/STOP switch to
position "1 ... F"
STOP (PLC
status
stopped)
Lights up
yellow
PLC program
stopped
(RUN/STOP
switch set to
position "0")
• Set RUN/STOP switch to
position "1 ... F"
Does not
light up
PLC program
started
(RUN/STOP
switch set to
position "1 ... F")
–
57

Festo CPX-CEC-S1-V3 Specifications

General

Brand	Festo
Model	CPX-CEC-S1-V3
Category	Controller
Language	English