Festo control block CPX-CEC
Select [System] [Diagnosis] to display the diagnostic information for the CPX modules.
Figure: Diagnosis on the homepage of the CPX-CEC module
5.6 Diagnosis in the user program
The following Festo libraries can be used for diagnosis in the user program:
– Festo_General_3: General device diagnosis.
– Festo_CPX_3: CPX-specific diagnosis.
Examples and documentation for this functionality can be found in the online Help for the respective
library.
5.7 Diagnosing CANopen
The library CAA_CiA405.Library is available for the CANopen master for diagnosing the CANopen
modules.
64
To Next Page
Loading...
Need help?
General
