Festo CPX-CEC-S1-V3 User Manual

Festo control block CPX-CEC
The following options can be set:
– Keep current values
– Set all outputs to default
– Execute program
Figure: PLC system settings
The setting of specific values in stop mode can therefore be achieved via the "Execute program" option.
Note
General I/O settings in stop mode always also refer to the master interfaces and not just the local
I/Os.
33

Festo CPX-CEC-S1-V3 Specifications

General

Brand	Festo
Model	CPX-CEC-S1-V3
Category	Controller
Language	English