Festo control block CPX-CEC
SoftMotion
Motion functionality integrated in the Codesys programming and runtime system.
The following motion control models are offered as modules:
– Single/multi-axis motions with PLCopen motion modules
– 2.5-D CNC controller.
PLC/IPC
Programmable logic controller/industrial PC.
TCP
Transmission Control Protocol; protocol for data transport and backup.
TCP/IP
Combination of the protocols TCP and IP, the most-widely used protocol in communication via Ethernet.
UDP
User Datagram Protocol; a minimal, connection-free network protocol that has a lower protocol overhead
compared to TCP. This protocol has the advantage of a faster exchange of data. Correct transmission
must be monitored (e.g. by a user program) due to the absence of feedback.
Target system ID
Unique device type code. Projects can only be uploaded to controllers if the set device type matches.
72
To Previous Page
Loading...
Need help?
General
