Need help?Do you have a question about the Festo Soft Stop SPC11 Series and is the answer not in the manual?
General| Input Voltage | 24 V DC |
|---|---|
| Output Current | 0.5 A |
| Operating Pressure | 6 bar |
| Ambient Temperature | 20 °C |
| Connection Size | G1/4 |
| Nominal Current Consumption | 0.1 A |
| Ambient Temperature Range | 0 to 50 °C |
Details the different types of SPC11 units and their connections for various drives.
Explains the closed-loop control circuit and the fundamental function of the SPC11 in positioning.
Identifies and describes the display, operating buttons, and connection ports on the SPC11 unit.
Explains how the SPC11 functions as a standard slave or with slave profile 7.4.
Provides instructions and dimensions for mounting the SPC11 unit onto a flat surface using support brackets.
Covers essential safety precautions and general guidelines before starting the installation process.
Details the installation of pneumatic parts like air supply, service units, and tubing, ensuring proper operation.
Covers precautions for installing electronic parts, cable management, and AS-Interface addressing.
Outlines the process of parametrizing and commissioning the SPC11 using its buttons or AS-Interface.
Describes setting parameters before connecting the drive, simplifying production commissioning and setup.
Explains the teach procedure for learning end positions and intermediate positions for accurate operation.
Covers safe operating procedures, including switching on/off, handling potential issues, and basic control.
Describes how the SPC11 displays fault numbers and indicates errors via LEDs for immediate troubleshooting.
Explains how faults are communicated to the AS-Interface master based on the active slave profile.
Provides a troubleshooting guide for common operational faults and their remedies, covering movement and positioning issues.
Offers methods to fine-tune positioning performance by adjusting parameters like cushioning and amplification.
Lists commands and parameters for advanced control and configuration via AS-Interface using slave profile 7.4.
Provides flowcharts illustrating programming sequences for fault handling, commissioning, and position loading on a PLC/IPC.
Lists detailed technical data, dimensions, operating ranges, environmental conditions, and electrical characteristics of the SPC11.
To Next Page