Festo Soft Stop SPC11 Series User Manual

1. Summary of components
1-6
Festo P.BE-SPC11-SYS-ASI -EN en 0203NH
Components
In order to implement fast positioning with electronically
closed-loop controlled end position cushioning, you will
require the following components:
– the Soft Stop SPC11
– a proportional directional control valve type MPYE-5-...
– a service unit with a 5 µm filter , without lubricator
– a permitted measuring system (external o r integrated
with th e drive)
– a drive, if possible with mechanical guide
– if possible, two fixed stops (depending on the dr ive used)
– a 24 V DC power supply
– if possible, components for a pneumatic emergency stop
circuit.

Festo Soft Stop SPC11 Series Specifications

General

Brand	Festo
Model	Soft Stop SPC11 Series
Category	Control Unit
Language	English