Festo Soft Stop SPC11 Series User Manual

4. Commissioning
4-13
Festo P.BE-SPC11-SYS-ASI-EN en 0203NH
4. Press all three buttons at the same time (> 2s).
The display shows the letter A (Amplification stage). The
value is reset to 0.
(A.00)
With the buttons +/- you can set the val ue again and transfer
it with E nter. The cushion i ng stage and the system parameter
canthenbesetagaininthesamewayandtransferred(see
section 4.2).

Festo Soft Stop SPC11 Series Specifications

General

Brand	Festo
Model	Soft Stop SPC11 Series
Category	Control Unit
Language	English