SYSTEM AND USER SOFTWARE 110
Backing up and restoring the E-41 Setup Configuration
The current E-41 Setup configuration settings can be backed-up before system software
installation and restored afterward using WebTools.
The following configuration settings can be backed up:
• Settings made using the Configure WebTool (except Server Name)
• Custom editing curves
•Custom spot colors
• Impose templates saved in the default directory for these files on the Print Server
•Preflight setup
• Address books
• Paper Catalog
NOTE: The configuration file is saved on the computer from which you access the Configure
WebTool. Make sure that you do not save the configuration file to the E-41 itself. Otherwise,
when you reinstall system software, the configuration file residing on the E-41 is deleted.
TO BACK UP OR RESTORE E-41 SETTINGS
1. From a client computer, start an Internet browser and type the IP address or DNS name of the
E-41.
The E-41 home page appears.
2. Click Launch Configure.
3. At the Login prompt, select Administrator in the user name field (if needed), type Fiery.1 in
the password field, and then select OK.
NOTE: Ty pe Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
4. Choose Server > Backup/Restore, and then choose one of the following options:
To backup settings To restore settings
• Click Backup Fiery Settings. • Click Restore Fiery Settings.
• In the dialog box that appears, accept
the default file name or type a new
name for the backup file.
• In the dialog box that appears, type
the name of the configuration
settings file or select it from the list.
• Click Save. • Click Open.
To Next Page
Loading...