TROUBLESHOOTING 129
Normal startup sequence
NOTE: The following description is approximate. The screens, times, and sequences that you
observe may vary slightly.
FIGURE 41: Normal startup sequence
Server name
Code in motherboard BIOS
initializes and configures
areas on the motherboard.
Code in UIB firmware
enables the UIB back light.
Windows operating system
establishes communication
with E-41 devices.
System software on the HDD
completes startup process.
Activity light
is off
1 second
10 seconds 2 minutes
1 2 3 4
Power on
Activity light
is off
STARTING UP...
Activity light
blinks green
20 seconds
1 minute
STARTING UP...
Activity light
blinks amber
Idle
To Next Page
Loading...