USING THE E-41 34
E-41 Control Panel Functions menu
The following options are available from the E-41 Functions menu:
•
Eject CD/DVD—Allows you to eject media from the DVD drive. Media is also
automatically ejected whenever the E-41 is restarted, shut down, or rebooted. A hardware
eject button is also provided below the disc slot.
•
IP Address—Displays the current IP address of the E-41.
•
Restart Server—Includes options to Restart (soft reset) or Reboot (hard reset) the E-41.
Selecting Restart resets the E-41 server software, but does not reboot the entire system.
Selecting Reboot shuts down all E-41 activity and reboots the system. When you select
Restart or Reboot, network access to the E-41 is temporarily interrupted and all currently
processing jobs are aborted and may be lost.
•
Shut Down System—Shuts down all E-41 server software and powers off the system.
Always select this option to power off the system.
NOTE: Avoid using the reset button on the front panel, as doing so may cause the system to
operate unpredictably. Use the reset button on the front of the E-41 only if the system is
frozen and unresponsive to keyboard or mouse actions.
Eject CD/DVD
IP Address
Restart Server
Shut Down System
Server name
Use the line selection buttons
to the right to select an option.
To Next Page
Loading...