9
REV. 00 02/01/2015
id.:
SYSTEM DESCRIPTION
2
2.1 SETTING UP
The system is made up of one of the following modes; each version calls for a specifi c confi guration which is
described in the diagram in which we include all the available options.
A sensor kit is provided for each mode.
FBC Weighing
Component Archive Management
Setting up preset values
Print receipt
Water pump automatic management
Standard USB port (for software upgrade only)
CBV STANDARD Component Archive Management
Setting up preset values
Advanced weighing with angle compensation (proximity),
Recipe Archive Management and components ratio recalculation
Water compensation in hygroscopic components
Advanced USB port for upgrading the software, downloading receipts, and uploading/
downloading components and recipes.
Automatic management of the water pump and additive pump
Mixing quality control
CBV ADVANCED Component Archive Management
Setting up preset values
Recipe Archive Management and components ratio recalculation
Advanced weighing with angle compensation (tilt sensor),
Machine tilting safety check
Water compensation in hygroscopic components
Advanced USB port for upgrading the software, downloading receipts, and uploading/
downloading components and recipes.
Automatic management of the water pump and additive pump
Mixing quality control
Moisture Probe and Mikrolab management
Data transmission management towards a GSM/GPRS communication device
The system has been designed to operate on a concrete production vehicle.
It allows to set up different mix and visualize and record the quantity of components (cement, water, gravel,
sand, etc.) used
After storing the components and the recipes, the electronic system allows monitoring the correct quantity of
each component of each recipe during loading.
The recipe complete with a list and weight of the components can be printed using the printer unit FPR282
(optional) and stored in electronic format on a pendrive so that you have a record of the operations performed
and can keep track of the compositions made.
To Next Page
Loading...
Need help?
General